|
|
Implementation of USB/LAN/WIFI interface
Voneš, Jaroslav ; Roubal, Zdeněk (referee) ; Steinbauer, Miloslav (advisor)
This bachelor thesis goes into implementing the most modern communication interfaces USB/LAN/WIFI to control the computer itself and also the incubator via a Web interface. The term describes the overall solution to the management of the incubator for using microcontroller ATmega8 with the possibility of the exchange of communication interfaces. For the USB converter was used the circuit FTDI FT232 BM company, from LANTRONIX Ethernet was used for Converter converter XPORT and eventually to communicate the WIFI was elected circuit ESP 8266
|
|
|
Design and realization of wireless interface ODBII-XBee
Zatloukal, Martin ; Frýza, Tomáš (referee) ; Prokopec, Jan (advisor)
This master’s thesis describes possibilities of usage of ZigBee communication protocol and integrated circuit ELM 327 in problem of realization universal diagnostic device, running by OBDII communication standards, which can be used to monitor function of all car´s electronic systems. Thesis also deals with design and realization of necessary electro technical devices and modules followed by compilation of control software and experimental measurements of these devices in real traffic flow. In the first part of project, there are reminded some basic features and parameters of OBDII, followed by description of ways how to use OBDII and adumbrating how to realize universal diagnostic system. The analysis of ZigBee system focused on XBee circuits follows. Construction, ways of data transfer and possibilities of controlling are described. Integrated circuits produced by ELM Electronics Company are introduced and possibilities of usage ELM 327 are described as requested by main task. Second part talks about designing of electronic circuits of this system, assembling schematic diagram and designing sources for production of PCB. Physical realization of these circuits and its first start is also included. Thesis finishes by dealing with practical experiences and measurements using real vehicles. This part talks also about means to improve system by several software solutions to reach more effective functioning of created device.
|
|
|
Realization of USB and LAN interface for incubator
Tydor, Maximilián ; Roubal, Zdeněk (referee) ; Steinbauer, Miloslav (advisor)
This project is focused on communication between PC and microcontroller based application. It presents few available ways to do so via modern, popular and widely used communication protocols such as USB or Ethernet. The goal of this project is to enable the microcontroller to communicate with PC and via this connection transfer the data from and to a controled application so the PC user will be able to read the actual state of the device and change its settings. As a CPU an ATmega16 is used with convertor from UART to USB type FT232BM produced by FTDI company and a UART to Ethernet convertor from Lantronix Inc. called XPort.
|
|
|
System for remote measuring and data storing in central database
Šváb, Jaroslav ; Pust, Radim (referee) ; Šebela, Radek (advisor)
This Master´s thesis deals with the design and implementation of System for remote measuring and data storing in central databese. The system consists of server, which collects data and clients that send data to the server. On the server is installed program Apache in which runs utility script for collecting and evaluating data, written in PHP. Data are stored in MySQL relational database and can be clearly displayed. The client consists of microcontroller ATmega16, which evaluates data from sensors. These data are then transferred via Ethernet using the HTTP protocol through the module XPort.
|
|
|
Implementation of USB/LAN/WIFI interface
Voneš, Jaroslav ; Roubal, Zdeněk (referee) ; Steinbauer, Miloslav (advisor)
This bachelor thesis goes into implementing the most modern communication interfaces USB/LAN/WIFI to control the computer itself and also the incubator via a Web interface. The term describes the overall solution to the management of the incubator for using microcontroller ATmega8 with the possibility of the exchange of communication interfaces. For the USB converter was used the circuit FTDI FT232 BM company, from LANTRONIX Ethernet was used for Converter converter XPORT and eventually to communicate the WIFI was elected circuit ESP 8266
|
|
|
Implementation of USB/LAN/WIFI interface
Voneš, Jaroslav ; Roubal, Zdeněk (referee) ; Steinbauer, Miloslav (advisor)
This semester the project goes into implementing the most modern communication interfaces USB/LAN/WIFI to control the computer itself and also the incubator via a Web interface. The term describes the overall solution to the management of the incubator for using microcontroller ATmega8 with the possibility of the exchange of communication interfaces. For the USB converter was used the circuit FTDI FT232 BM company, from LANTRONIX Ethernet was used for Converter converter XPORT and eventually to communicate the WIFI was elected circuit ESP 8266
|
|
|
Realization of USB and LAN interface for incubator
Tydor, Maximilián ; Roubal, Zdeněk (referee) ; Steinbauer, Miloslav (advisor)
This project is focused on communication between PC and microcontroller based application. It presents few available ways to do so via modern, popular and widely used communication protocols such as USB or Ethernet. The goal of this project is to enable the microcontroller to communicate with PC and via this connection transfer the data from and to a controled application so the PC user will be able to read the actual state of the device and change its settings. As a CPU an ATmega16 is used with convertor from UART to USB type FT232BM produced by FTDI company and a UART to Ethernet convertor from Lantronix Inc. called XPort.
|
|
|
Design and realization of wireless interface ODBII-XBee
Zatloukal, Martin ; Frýza, Tomáš (referee) ; Prokopec, Jan (advisor)
This master’s thesis describes possibilities of usage of ZigBee communication protocol and integrated circuit ELM 327 in problem of realization universal diagnostic device, running by OBDII communication standards, which can be used to monitor function of all car´s electronic systems. Thesis also deals with design and realization of necessary electro technical devices and modules followed by compilation of control software and experimental measurements of these devices in real traffic flow. In the first part of project, there are reminded some basic features and parameters of OBDII, followed by description of ways how to use OBDII and adumbrating how to realize universal diagnostic system. The analysis of ZigBee system focused on XBee circuits follows. Construction, ways of data transfer and possibilities of controlling are described. Integrated circuits produced by ELM Electronics Company are introduced and possibilities of usage ELM 327 are described as requested by main task. Second part talks about designing of electronic circuits of this system, assembling schematic diagram and designing sources for production of PCB. Physical realization of these circuits and its first start is also included. Thesis finishes by dealing with practical experiences and measurements using real vehicles. This part talks also about means to improve system by several software solutions to reach more effective functioning of created device.
|
|
|
System for remote measuring and data storing in central database
Šváb, Jaroslav ; Pust, Radim (referee) ; Šebela, Radek (advisor)
This Master´s thesis deals with the design and implementation of System for remote measuring and data storing in central databese. The system consists of server, which collects data and clients that send data to the server. On the server is installed program Apache in which runs utility script for collecting and evaluating data, written in PHP. Data are stored in MySQL relational database and can be clearly displayed. The client consists of microcontroller ATmega16, which evaluates data from sensors. These data are then transferred via Ethernet using the HTTP protocol through the module XPort.
|
|
|
Factors for successful admission to the accelerator xPORT
Nedělová, Nikola ; Svobodová, Ivana (advisor) ; Andera, Michal (referee)
The goal of the thesis Factors for successful admission to the accelerator xPORT is comparison of factors of success from startup point of view in business accelerator and professionals working in accelerator. The first part is focused on different types of support for startups. The second part summarizes general information about xPORT VŠE Business Accelerator. The third part is devoted to important factors for successful implementation of projects. The last part contains the analysis of questionnaire survey and the main recommendations.
|
guest ::
